Page 3

Page 3
How to Install Laminate Floor Floors?

A laminate floor is nothing but a thin veneer layer glued to a standard floor that is then laminated over. Laminates are generally very durable and do not require the upkeep of traditional hardwood floors. Laminate floors are used for such things as driveways, entrances, garages, workshops and even in houses. This article is all about the basic features of laminate floorings. To gather more awesome ideas, click here to get started

Laminate floors are a multi-layered composite flooring product, fused together with an epoxy lamination procedure. Basically, laminate floor boards are covered with an acrylic protective layer, then a melamine resin coating and finally there is a thick fiber board layer underneath. When installing a laminate floor, it is best to employ a professional to do the work, as the process is rather complicated and requires precise instruments to do the job well. If you intend to install your own laminate floor, then please do not attempt to do so on your own as it requires knowledge of the flooring procedure along with an adequate level of skill. It is strongly recommended that you employ the services of a floor installation or home improvement professional to complete the task, as failure to do so can result in serious injury. Here's a good read about National Floors Direct, check it out!

When it comes to installing laminate floors, what you are basically doing is covering the floor with a thick melamine sheet. The top layer can be made of almost any type of material, such as a melamine resin, and then various types of thin (and sometimes transparent) veneers on top of the melamine. The bottom surface is made up of pure hardwood or natural wood. You may also find that you need to have a special kind of adhesive used to permanently attach the layers together.

The number of layers in the flooring will depend on your personal requirements. If you are looking for a more contemporary feel to the room, then you will need to look for layers that are slightly lighter in color, as dark colors tend to create a more antique effect. On the other hand, if you are striving for an authentic Look of wooden flooring, then the number of layers will decrease, so that the floor looks more like wood. Although it is possible to achieve a laminate floor with just one or two layers, it is better to go for at least five or six layers, as this will provide greater durability and long lasting use. Moreover, the thicker layers provide added structural support for the floor, which is very important especially when you are planning to install it in high traffic areas like the entrance hall of your house or the basement.

When it comes to installing the floor, it is very important to lay out the pattern or design on the baseboard first before the melamine sheet is applied. This will help you accurately measure the dimensions of the entire floor. Once the layout is finalized, you can start the installation process by preparing the subfloor. This requires careful scraping of the floor with a blunted vacuum cleaner in order to remove all traces of the adhesive backing of the natural wood planks. After the baseboard is ready, you can go ahead and place the thin wooden planks evenly across the floor in a uniform fashion, so that they do not end up pulling or jutting out of each other. Kindly visit this website  for more useful reference.

Next, you have to choose the correct image layer, which is quite necessary depending on the type of laminate floors you select. For a wooden floor, you have to pick out the image that closest resembles the natural wood look; for instance, if you are using oak, you have to pick out an image that closely resembles a real oak tree. The glue used for the installation process is very easy to remove, so you can just use a dry piece of cloth and ease it into place over the glue. Last but not least, you should make sure that the subfloor is sealed well, as this will also help in the long term performance of your laminate floors.